Quality Policy
Our Quality Commitment
OEC is dedicated to total quality in everything we do. Our commitment to continuous improvement, teamwork, integrity, and excellence forms the backbone of our quality policy. We strive to deliver every project on time, ensuring that our clients receive the highest standards of service and reliability.
Our highly professional and skilled team of enthusiastic, dedicated engineers serves as the backbone for our Engineering division and provides complete developmental cycle of projects i.e. Design, Supply, Installation, Commissioning, Testing with innovative and economical solutions.
| Sl. No. | Specification | Standard No. | IS Standard |
|---|---|---|---|
| 1 | SPECIFICATION FOR COLD ROLLED LOW CARBON STEEL SHEETS AND STRIPS (DWG. QUALITY) | QIS-12 | IS : 513-1986 |
| 2 | SPECIFICATION FOR ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS & SECTIONS FOR GENERAL ENGINEERING PURPOSE. (III REV) | QIS-15 | IS : 733-1983 |
| 3 | COLOURS FOR READY MIXED PAINTS AND ENAMELS (IV REV) | QIS-1 | IS : 5-1994 RAL Standard BS 381 C/BS 4800 |
| 4 | METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS | QIS-3 | IS : 101-1964 |
| 5 | SPECIFICATION FOR READY MIXED PAINTS, SPRAYING, FINISHING, STOVING, ENAMEL, FOR GENERAL PURPOSE, COLOUR AS REQUIRED (I REV) | QIS-10 | IS : 151-1986 |
| 6 | POWDER COATINGS- SPECIFICATIONS | QIS-131 | IS : 13871-1993 |
| 7 | PAINTS AND VARNISHES – CROSS-CUT TEST | QIS-134 | ISO – 2409 |
| 8 | STANDARD TEST METHODS OF ORGANIC COATING | QIS-135 | ASTM D 522 – 93 A |
| 9 | METHOD FOR BEND TEST (II REV) | QIS-25 | IS : 1599-1985 |
| 10 | SPECIFICATION FOR READY MIXED PAINT, AIR DRYING, RED OXIDE, ZINC CHROMATE, PRIMING (II REV) | QIS-32 | IS : 2074-1992 |
| 11 | STANDARD METHOD OF SALT SPRAY (FOG TESTING) | QIS-127 | ANSI/ASTMB 117-73 IS 101 : 1988 |
| 12 | SPECIFICATION FOR ELECTROPLATED COATINGS OF ZINC ON IRON AND STEEL (II REV) | QIS-24 | IS : 1573-1986 |
| 13 | SPECIFICATION FOR PHOSPHATE TREATMENT OF IRON AND STEEL FOR PROTECTION AGAINST CORROSION | QIS-44 | IS : 3618-1966 |
| 14 | CODE FOR PRACTICE FOR PHOSPHATING OF IRON AND STEEL | QIS-57 | IS : 6005-1970 |
| 15 | SPECIFICATION FOR PVC INSULATED CABLES FOR WORKING VOLTAGES UPTO AND INCLUDING 1100 VOLTS – (III REV) | QIS-14 | IS : 694 -1990 |
| 16 | METHOD OF TEST FOR CABLES – INSULATION RESISTANCE | QIS-129 | IS : 10810 (43)-1984 |
| 17 | METHOD OF TEST FOR CABLES – HIGH VOLTAGE TEST | QIS-130 | IS : 10810 (45)-1984 |
| 18 | SPECIFICATION FOR PVC INSULATED (HEAVY DUTY) ELECTRIC CABLES | QIS-22 | IS : 1554-1988 |
| 19 | SPECIFICATION FOR COPPER STRIP FOR ELECTRICAL PURPOSE (II REV) | QIS-26 | IS : 1897-1983 |
| 20 | SPECIFICATION FOR INTRCONNECTING BUS-BARS FOR AC VOLTAGE ABOVE 1 KV UPTO AND INCLUDING 36 KV | QIS-66 | IS : 8084-1976 |
| 21 | SPECIFICATION FOR DIRECT ACTING INDICATING ANALOG ELECTRICAL MEASURING INSTRUMENT AND THEIR ACCESSORIES | QIS-17 | IS : 1248-1983 |
| 22 | PECIFICATION FOR VISUAL INDICATOR LAMPS (I REV) | QIS-27 | IS : 1901-1978 |
| 23 | SPECIFICATION FOR PUSH-BUTTON SWITCHES | QIS-48 | IS : 4794-1968 |
| 24 | SPECIFICATION FOR HOLDERS FOR INDICATOR LAMPS FOR ELECTRONIC AND TELECOMMUNICATION EQUIPMENT | QIS-50 | IS : 4795-1968 |
| 25 | METHOD OF HIGH VOLTAGE TESTING PART-II TEST PROCEDURES (I REV) | QIS-136 | IS : 2071(2)-1974 |
| 26 | SPECIFICATION FOR TOGGLE SWITCHES | QIS-42 | IS : 3452-1966 |
| 27 | ISO METRIC SCREW THREADS | QIS-45 | IS : 4218-1976 |
| 28 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS | QIS-85 | ISO : 9000-2000 |
| 29 | GENERAL TOLERANCES – TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS (III REV) | QIS-33 | IS : 2102-1993 ISO : 2768-1989 |
| 30 | METHODS FOR DETERMINATION OF SAMPLE SIZE TO ESTIMATE THE AVERAGE QUALITY OF A LOT OR PROCESS | QIS-53 | IS : 5002-1969 |
| 31 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR LOW- VOLTAGE SWITCHGEAR AND CONTROL GEAR | QIS-38 | IS : 2147-1962 |
| 32 | DEGREE OF PROTECTION OF ENCLOSED EQUIPMENT | QIS-100 | IS : 13947-1983 |
| SPECIFICATION FOR COLD ROLLED LOW CARBON STEEL SHEETS AND STRIPS (DWG. QUALITY) | |
|---|---|
| Standard No. | QIS-12 |
| IS Standard | IS : 513-1986 |
| SPECIFICATION FOR ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS & SECTIONS FOR GENERAL ENGINEERING PURPOSE. (III REV) | |
|---|---|
| Standard No. | QIS-15 |
| IS Standard | IS : 733-1983 |
| COLOURS FOR READY MIXED PAINTS AND ENAMELS (IV REV) | |
|---|---|
| Standard No. | QIS-1 |
| IS Standard | IS : 5-1994 RAL Standard BS 381 C/BS 4800 |
| METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS | |
|---|---|
| Standard No. | QIS-3 |
| IS Standard | IS : 101-1964 |
| SPECIFICATION FOR READY MIXED PAINTS, SPRAYING, FINISHING, STOVING, ENAMEL, FOR GENERAL PURPOSE, COLOUR AS REQUIRED (I REV) | |
|---|---|
| Standard No. | QIS-10 |
| IS Standard | IS : 151-1986 |
| POWDER COATINGS- SPECIFICATIONS | |
|---|---|
| Standard No. | QIS-131 |
| IS Standard | IS : 13871-1993 |
| PAINTS AND VARNISHES – CROSS-CUT TEST | |
|---|---|
| Standard No. | QIS-134 |
| IS Standard | ISO – 2409 |
| STANDARD TEST METHODS OF ORGANIC COATING | |
|---|---|
| Standard No. | QIS-135 |
| IS Standard | ASTM D 522 – 93 A |
| METHOD FOR BEND TEST (II REV) | |
|---|---|
| Standard No. | QIS-25 |
| IS Standard | IS : 1599-1985 |
| SPECIFICATION FOR READY MIXED PAINT, AIR DRYING, RED OXIDE, ZINC CHROMATE, PRIMING (II REV) | |
|---|---|
| Standard No. | QIS-32 |
| IS Standard | IS : 2074-1992 |
| STANDARD METHOD OF SALT SPRAY (FOG TESTING) | |
|---|---|
| Standard No. | QIS-127 |
| IS Standard | ANSI/ASTMB 117-73 IS 101 : 1988 |
| SPECIFICATION FOR ELECTROPLATED COATINGS OF ZINC ON IRON AND STEEL (II REV) | |
|---|---|
| Standard No. | QIS-24 |
| IS Standard | IS : 1573-1986 |
| SPECIFICATION FOR PHOSPHATE TREATMENT OF IRON AND STEEL FOR PROTECTION AGAINST CORROSION | |
|---|---|
| Standard No. | QIS-44 |
| IS Standard | IS : 3618-1966 |
| CODE FOR PRACTICE FOR PHOSPHATING OF IRON AND STEEL | |
|---|---|
| Standard No. | QIS-57 |
| IS Standard | IS : 6005-1970 |
| SPECIFICATION FOR PVC INSULATED CABLES FOR WORKING VOLTAGES UPTO AND INCLUDING 1100 VOLTS – (III REV) | |
|---|---|
| Standard No. | QIS-14 |
| IS Standard | IS : 694 -1990 |
| METHOD OF TEST FOR CABLES – INSULATION RESISTANCE | |
|---|---|
| Standard No. | QIS-129 |
| IS Standard | IS : 10810 (43)-1984 |
| METHOD OF TEST FOR CABLES – HIGH VOLTAGE TEST | |
|---|---|
| Standard No. | QIS-130 |
| IS Standard | IS : 10810 (45)-1984 |
| SPECIFICATION FOR PVC INSULATED (HEAVY DUTY) ELECTRIC CABLES | |
|---|---|
| Standard No. | QIS-22 |
| IS Standard | IS : 1554-1988 |
| SPECIFICATION FOR COPPER STRIP FOR ELECTRICAL PURPOSE (II REV) | |
|---|---|
| Standard No. | QIS-26 |
| IS Standard | IS : 1897-1983 |
| SPECIFICATION FOR INTRCONNECTING BUS-BARS FOR AC VOLTAGE ABOVE 1 KV UPTO AND INCLUDING 36 KV | |
|---|---|
| Standard No. | QIS-66 |
| IS Standard | IS : 8084-1976 |
| SPECIFICATION FOR DIRECT ACTING INDICATING ANALOG ELECTRICAL MEASURING INSTRUMENT AND THEIR ACCESSORIES | |
|---|---|
| Standard No. | QIS-17 |
| IS Standard | IS : 1248-1983 |
| PECIFICATION FOR VISUAL INDICATOR LAMPS (I REV) | |
|---|---|
| Standard No. | QIS-27 |
| IS Standard | IS : 1901-1978 |
| SPECIFICATION FOR PUSH-BUTTON SWITCHES | |
|---|---|
| Standard No. | QIS-48 |
| IS Standard | IS : 4794-1968 |
| SPECIFICATION FOR HOLDERS FOR INDICATOR LAMPS FOR ELECTRONIC AND TELECOMMUNICATION EQUIPMENT | |
|---|---|
| Standard No. | QIS-50 |
| IS Standard | IS : 4795-1968 |
| METHOD OF HIGH VOLTAGE TESTING PART-II TEST PROCEDURES (I REV) | |
|---|---|
| Standard No. | QIS-136 |
| IS Standard | IS : 2071(2)-1974 |
| SPECIFICATION FOR TOGGLE SWITCHES | |
|---|---|
| Standard No. | QIS-42 |
| IS Standard | IS : 3452-1966 |
| ISO METRIC SCREW THREADS | |
|---|---|
| Standard No. | QIS-45 |
| IS Standard | IS : 4218-1976 |
| QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS | |
|---|---|
| Standard No. | QIS-85 |
| IS Standard | ISO : 9000-2000 |
| GENERAL TOLERANCES – TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS (III REV) | |
|---|---|
| Standard No. | QIS-33 |
| IS Standard | IS : 2102-1993 ISO : 2768-1989 |
| METHODS FOR DETERMINATION OF SAMPLE SIZE TO ESTIMATE THE AVERAGE QUALITY OF A LOT OR PROCESS | |
|---|---|
| Standard No. | QIS-53 |
| IS Standard | IS : 5002-1969 |
| DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR LOW- VOLTAGE SWITCHGEAR AND CONTROL GEAR | |
|---|---|
| Standard No. | QIS-38 |
| IS Standard | IS : 2147-1962 |
| DEGREE OF PROTECTION OF ENCLOSED EQUIPMENT | |
|---|---|
| Standard No. | QIS-100 |
| IS Standard | IS : 13947-1983 |
Our Quality Policy
At O.E.C. Global, quality is at the heart of everything we do. We adhere to rigorous standards and practices to ensure:
- Customer Satisfaction: We prioritize exceeding customer expectations through reliable products and services.
- Continuous Improvement: We continuously innovate and improve processes to achieve operational excellence.
- Compliance: We strictly adhere to international quality standards and regulatory requirements.
- Employee Engagement: Our team is empowered through training and involvement to enhance quality.
- Environmental Responsibility: We integrate sustainable practices to minimize our environmental footprint.
- Ethical Practices: Integrity, transparency, and ethical conduct guide all our business practices.
Explore how O.E.C. Global’s commitment to quality ensures reliable and innovative solutions for your needs. Contact us to learn more about our quality assurance practices and how they benefit your projects.
